Palm OS/WinMo Hardware

[#1]

I am a new owner of Tungsten C.  More of a Gearhead than a Techie.  So far it works great and does all that I want, still learning the nuances of the machine.  Hope this is posted in the right area, but I have a couple if questions.

The SD slot does not recognise that a card has been inserted, is this a format issue on the card, do I need to get a unit specific card ( the card is a SanDisc 4gb) or the slot has an issue?

My main use for the machince is to consolidate all the items I have been carring, i.e day planner, mp3, check registar, and e-book.

Feed back is appreciated.

Thanks

Dave (dbell@4masonry.com)

Post relates to: Tungsten C

[#2]

The card is too large, and of a newer design than the T|C can read.

Here's an article from Palm listing the maximum card size for each device.  (The card must be of the older SD designation, not "SD HC").

http://kb.palm.com/wps/portal/kb/common/article/34080_en.html

WyreNut

[#3]

Thanks for the info and link. Although the link did not mention the Tungsten C, would it be safe to assume that a 1 or 2 gig SD card would be the ticket.

Also are these older style cards still around and where.

Thanks again, will keep all posted on my continuing adventures in Palm land

[#4]

---

dwbell80911 wrote:

Thanks for the info and link. Although the link did not mention the Tungsten C, would it be safe to assume that a 1 or 2 gig SD card would be the ticket.

Also are these older style cards still around and where.

Thanks again, will keep all posted on my continuing adventures in Palm land

---

I'd be safe and try a 1GB card.

Punching in "1GB SD card" into Google produced almost 5 million hits... Not too hard to find one!  

WyreNut

[#5]

You will have to use a 1mb card. Staples swore that my device needed a 2mb card, but someone mentioned a 1mb on a previous forum, I decided to see if a 1mb card would work, and it did.